Abus TVVR33004 User Manual

Also see for TVVR33004: User guide Quick guide

Abus TVVR33004 User Manual Manual pdf 46 page image

HDD111Add NetHDDAdditional data storage devices can be added to enablestorage across the network.Click on Add to add a NetHDD.Click on Search to identify the network storage and thenclick on OK to add the NetHDD.The NetHDD must be initialised before use.Advanced settingsHere you can define the settings for the storage mode.Mode: QuotaIn this mode, video data is divided between the totalnumber of data storage devices connected and writtenonto them.Camera Selection of the camera channelto be processedUsed RecordCapacityVideo storage space currently inuse on the linked data storagedevices.Used PictureCapacityPicture storage space currentlyin use on the linked data storagedevices.HDD Capacity(GB)Total available hard disk drivecapacity (in GB).Max. RecordCapacity (GB)Specify the maximum videorecording size on the linked datastorage devices for eachcamera.Enable HDDSleepingWhen this function is activated,idle hard disk drives go intostandby mode.1. Use Copy to specify if the setting is to be applied toall cameras.2. Confirm the settings by clicking on Apply and exit themenu by clicking on OK.WarningWhen using NetHDDs, ensure that your network isof a sufficient size.NoteThe playback of recorded data may be slower ifyou use NetHDDs than if you are using theinternal hard disk drives.NetHDD Choose from eight NetHDDs.Type NAS: For this setting, yournetwork storage must support theNFS file system.IP SAN: For this setting, yournetwork storage must support theiSCSI protocol.IP Address Enter the network storage IPaddress.NetHDD Directory Enter the storage path or iSCSItarget.