Abus TVVR40000 User Manual

Abus TVVR40000 User Manual Manual pdf 16 page image

System operation16On-screen keyboardThe on-screen keyboard appears after clicking on a textentry field with the mouse:The keys have the same function as on a computer keboard.• To enter the character, left-click the mouse.• To finish data entry, press Enter.• To delete the character in front of the cursor, click on.• To switch between upper and lower case, click on theframed a symbol. The current setting is displayedabove the keyboard.• To cancel the entry or exit the field, press ESC.Starting the deviceImportantThe device must only be operated with the mainspower specified on the type plate.For safety reasons, use an uninterruptible powersupply (UPS).After the device has been connected to the power supplyand the main switch on the rear of the device is switchedon, the DVR status LED lights up.1. The device carries out a self-test during the startprocedure. The status of the DSP processors andthe HDD appears. If an “X” is displayed, then this idicates that the initialisation has failed or the HDD isnot installed.2. The setup wizard appears. Exit the wizard to accessthe live view.screen keyboard appears after clicking on a textThe keys have the same function as on a computer key-click the mouse.To delete the character in front of the cursor, click onTo switch between upper and lower case, click on thesymbol. The current setting is displayedTo cancel the entry or exit the field, press ESC.The device must only be operated with the mainsFor safety reasons, use an uninterruptible powerAfter the device has been connected to the power supplyand the main switch on the rear of the device is switchedtest during the start-uptatus of the DSP processors andthe HDD appears. If an “X” is displayed, then this in-dicates that the initialisation has failed or the HDD isThe setup wizard appears. Exit the wizard to accessSwitching off, locking and rebooting thedeviceClick on “ShutDown” in the main menuappears.1. To switch off the device, selectfirm by pressing Yes. The device is thenoff.• Do not press any keys during the shutdown prcedure.2. To lock the system, select the correspondingsymbol on the left. The user interface is now lockedand a password must be entered to access themenu.3. To reboot the device, select the correspondingboot symbol on the right. The device is then rbooted.Switching on the device• Press and hold the OK key for 5 seconds to switchthe device back on., locking and rebooting theClick on “ShutDown” in the main menu. The overviewTo switch off the device, select ShutDown and con-. The device is then switchedDo not press any keys during the shutdown pro-To lock the system, select the corresponding Locksymbol on the left. The user interface is now lockedand a password must be entered to access theTo reboot the device, select the corresponding Re-symbol on the right. The device is then re-key for 5 seconds to switch