Setup wizard18Setup wizardSetting up the systemThe setup wizard guides you through the necessary ba-sic system settings. The DVR is then set up for recordingand surveillance.NoteAll detailed settings can be found in the devicemenu (see overview on page 31).The language selection appears after switching on for thefirst time:1. Click the entry field and select the desired languagefrom the list. Click on Next to continue. The followingquery appears:• Click on “Next” to start the wizard.NoteAfter the system is set up, you can untick the box.The setup wizard is then no longer started auto-matically.Setting up the administratorWarningNote down the admin password.The following password is preset“1 2 3 4 5”1. Click the entry field and enter your admin password.2. To assign a new password, tick the box next to NewAdmin Password.3. Enter the new password and confirm in the field be-low.4. Click on Next.General Settings1. Click on “Enter” in the next window.2. Enter the system time (date and time). Click on Ap-ply to accept the data. Exit the setting by pressingOK, then click on Next.
