Abus TVVR41100 User Manual

Contents

Abus TVVR41100 User Manual Manual pdf 86 page image

Live view22System SettingsNoteThe live view can be set as follows.Open the main menu, then click on “System Settings”and then “Display Settings”:Video Output VGA, monitor, AUX (CVBS)Selects the connection where thesettings should be changedMode Various camera layoutsDwell Time Switching time between the individ-ual cameras in “Stop Auto-switch”Camera Order Camera order in the live viewEnable AudioOutputActivates / deactivates audio outputon the video outputEvent OutputPortUsed to assign a monitor for eventoutputEvent Dwell Time The period where the event is dis-played on the assigned monitor (inseconds)NoteVGA monitor connected:A connected VGA monitor automatically becomesthe main monitor where the audio output is alsoassigned. The BNC output Video Spot Out outputdisplays the cameras in sequence and in fullscreen.If during the boot process of the DVR the VGA cable is notconnected, the main video signal is displayed at BNC outputMAIN. Connect the VGA cable and reboot the DVR in order todisplay the main video signal at the VGA output.No VGA monitor connected:The main video signal is displayed at BNC outputMAIN. The BNC output Video Spot Out outputdisplays the cameras in sequence and in fullscreen.Setting the camera outputUp to 16 cameras can be set simultaneously in the liveview.1. Click on “Set”.2. Select the display mode.• 1 x 1• 2 x 2• 3 x3 etc. (the overview changes according toyour settings)3. The camera signal is assigned to the correspondingimage section using the navigation keys.• “X” means that this camera is not displayed.4. Click on OK to accept the settings.NoteThe output at the spot monitor is always in fullscreen.