Abus TVVR50011 User Manual
                                                                  | |
Contents
| 
System operation14Connections on the rear of the deviceNotePay attention to the overview on page 3.No. NameFunction8 VIDEO SPOT OUT: BNC video output• When using a HDMI/VGA monitor:No video signal is displayed.• When using no HDMI/VGA monitor:The video spot signal is displayed..AUDIO SPOT OUT: Cinch audio output9 MAIN: BNC video output• When using a HDMI/VGA monitor:Video spot signal is displayed.• When using no VGA monitor:The main video signal is displayed.AUDIO OUT: Cinch audio output (synchronisedwith video output)10 LINE IN 1, 2: Cinch audio input11 VGA:• VGA monitor connection (9-pin), video outputsignal12 RS-232:• Serial port – no functionality13 HDMI• HDMI monitor connection14 LAN:• Ethernet LAN connection15 USB port16 ALARM IN:• RS-485 connection for PTZ cameras• Max. 16 alarm inputsALARM OUT:• Max. 4 relay outputs17 Connection for earthing line18 Power switch and mains power connection:• 100–240 V AC, 50–60 Hz19 LOOP OUT: Connection for looped video signals(cable available separately)20 VIDEO IN: BNC inputsAUDIO IN: Cinch inputsNoteAll audio inputs have no audio amplifier -> the au-dio signal has to be amplified before connected.Therefore you can use a microphone amplifier.Operating elements on the remote controlNotePay attention to the remote control diagram onpage 4.No. NameFunction21 DEV:Assigns the remote control with the device ID22 Alphanumeric keys:• Selects the camera (channel) in the live view• Entry of letters and digits in system fields23 A:Changes the entry format (upper / lower case,symbols, digits)24 PLAY:Starts playback25 VOIP• Not used26 PREV:Changes the screen display in the live view27 Navigation keys:During playback:• , Sets the speed• ⊳, Previous / next dayIn the live view:• Selects the camera (channel selection)In menus:• Navigation28 ESC:• Not used |
Related manuals for Abus TVVR50011
manualsdatabase
Your AI-powered manual search engine