Abus TVVR50011 User Manual

Contents

Abus TVVR50011 User Manual Manual pdf 42 page image

Device menu42Zones: Schedule and notificationNoteYou can assign the surveillance parameters indi-vidually and control the notification type for tampermonitoring, motion detection and video loss detec-tion.Schedule1. Select Schedule in the advanced camera settings.2. Select the day and enter the schedule.NoteYou can define up to 8 time periods (each from00:00 to 00:00). The times in the individual peri-ods must not overlap.3. Select whether the settings should be applied to alldays of the week using Copy To and confirm withCopy.4. Exit the settings by pressing OK.Notification1. Select Handle in the advanced camera settings.2. Enter the notification type:Parameter NotificationPop-up Image on Moni-torMessage appears on moni-torAudio Warning The device emits a repeat-ing toneNotify Surveillance Cen-treSee page 52Send Email An e-mail is sent to a spe-cific e-mail address (seepage 52)Trigger Alarm Output See page 563. Click on Apply to accept the settings.4. Click on OK to exit the menu.Adding a network cameraIn the “Camera Management” menu, click on “Add”.The available network cameras are shown at the top ofthe screen.• If the camera to be added does not appear, click onRefresh.• Alternatively, you can enter the data for the networkcamera manually.Parameter SettingIP Camera No. IP camera number in the DVRIP CameraAddressUnique address of the IP camerawithin the applied IP address rangeManage Port http port of IP cameraChannel No. Channel numberManufacturer Select the IP protocol of the cameramanufacturerAdmin Name Administrator user nameAdmin Pass-wordAdministrator password• After entering the data press OK to add the networkcamera.