22 of 36 Copyright Accelerated Concepts, Inc. © 2013NetBridge Users GuidePort ForwardingThis setting is used to forward incoming WAN traffic to specific hosts on the LAN.The syntax is as follows:t-‐PORT|u-‐PORT|p-‐PROTOCOL_NUMBER DESTINATION_IP[:DESTINATION_PORT]Example: t-‐80 192.168.1.4:8000, u-‐500 192.168.1.1, p-‐50 192.168.1.1 The example setsredirects TCP port 80 to port 8000 on 192.168.1.4, forwards UDP port 500 to192.168.1.1, and forwards ESP (ip protocol 50) to 192.168.1.1Applies to firmware versions after 1.391.91. For earlier versions use 'ptf'.
