Accelerated Concepts Cellular Router User Manual
                                    | |
Contents
| 
27 of 36 Copyright Accelerated Concepts, Inc. © 2013NetBridge Users GuideAppendix A - Installing USBModemsThe NetBridge has two USB ports for connecting a cellular USB modem, an internal port and anexternal port. The internal port allows for every supported USB modem to be placed inside theNetBridge, adding an extra measure of security for the modem. However, some USB modems,due to their size dimensions, are not intuitive in their placement inside the NetBridge. Thefollowing provides details on how to place specific modems into the internal USB slot of theNetBridge. A list of the supported USB modems can be seen on the Accelerated Conceptswebsite: http://www.acceleratedconcepts.com/supportNote: If a cellular USB modem is not listed below, then the modem does not have any issuesfitting inside the NetBridge device.AT&T LG Turbo• Follow steps from the Introduction section above to remove the external case from theNetBridge. Insert the AT&T LG Turbo modem into the internal USB port as shown.• While the modem is still inserted into the internal USB port, turn the modem clockwise 90˚,as shown below. Continue to follow the steps from the Introduction section above toreplace the external case on the NetBridge. |
Related manuals for Accelerated Concepts Cellular Router
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine