36 Changing Oil* 1. Start the engine and let it warm up for 2-3 minutes, and thenturn off the ignition switch and remove the oil filling cap.2. Remove the oil pan drain plug at the bottom of the engine.Turning clockwise the plug to tighten it, and turncounterclockwise to loosen it. Use a container to keep thedrained oil.3. After oil is drained up, tighten the oil pan drain plug. Then, fillin correct oil with appropriate volume.4. Visually check that the oil level is between the upper andlower limits. Then, tighten the oil filling cap.5. The tightening torque for the oil pan drain plug is 3.0 kg-m.Note:*To reduce the risk of getting burn, do not change oil when theengine is still very hot.Oil filling capOil pan drain plug