Access Motor TE 250-U Operator's Manual
                                                           | |
Contents
| 
53■ Replacing the FuseTurn off the ignition switch and check if the fuse is blown.When replacing the fuse, always get a fuse of thespecified rating.* Before replacing the fuse, first find out why it is blown.* Remove the seat* The fuse is located behind the battery* To remove the fuse:Open the fuse box and take out the blown fuse.If the fuse is not well in contact, it will create heat andeasily leads to circuit failure.* To assemble it:Insert the fuse in the holder and position the cover backin place.Be sure to gently pull the fuse to ascertain that the fusehas good contact. A loose fuse will generate heat.Fuse rating: 10A, 15A and 30A.* To replace the battery (lamps), use only the original componentsof the prescribed specification.* If components are not original or out of specification, the fusecan easily be blown, and the battery will not be in balancedstatus.When washing the ATV, do not wash it with high-pressure waterjet.Notes:* To remove the fuse:Care should be taken when removing the fuse, as its holder isvery small. If the fuse does not have good contact after openingthe cover, it may generate heat and lead to circuit failure.* To assemble the fuse:Insert the fuse in its holder.Be sure to gently pull the fuse to ascertain that the fuse is well incontact. A loose fuse will generate heat. |
Related manuals for Access Motor TE 250-U
manualsdatabase
Your AI-powered manual search engine