P20SECTION 8CASH®Magnum XLCLEANING & GENERALMAINTENANCE©TABLE NOTES** Product Data Sheets available upon request# Brush and Mop supplied in accordance with the calibre of toolItems highlighted above are included with every CASH Magnum XL.The non-highlighted items are available as maintenance spares.MAINTENANCE AND CLEANING RECORDIt is good practise and a requirement of EU COUNCIL REGULATION (EC) No 1099/2009 - On the protection of animalsat the time of killing, that all stunning equipment is maintained in accordance with the manufacturers’ instructions and that a logdetailing the maintenance is recorded and available for external auditing purposes.We recommend you create a maintenance and cleaning record for each individual stunning tool, containing as a minimumthe following information4 Stunner product code and description4 Serial number4 Service start date (date tool was first used)4 Cleaning dates - both daily and weekly (in accordance with the cleaning stated in this instruction manual)4 Part replacement details - part number and description - date replacement/maintenance took place4 Stun Check record - Univeral Stun Check unit serial number, date checked, cartridge colour used, pass or fail4 Shots fired - total number of shots fired with the tool on a daily or weekly basis4 Name and position of person conducting the cleaning or maintenance on any given dayPART NO. DESCRIPTION QUANTITYPER SET5644 CLEANER ASSEMBLY 15645 STEEL CLEANER BRUSH 15646 BRASS CLEANER BRUSH 15647 CLEANER HANDLE 15900 HANDLE 1# 5902 WOOL MOP (.25) 1# 5904 CHAMBER BRUSH (.25) 14187 ** CASH PISTOL OIL 14192 ** COPASLIP THREAD GREASE 16067 ** YOUNGS 303 FLUID 1DO NOT ATTEMPT TO USE THIS STUNNING TOOL UNTIL YOU HAVE READ ANDUNDERSTOOD THESE INSTRUCTIONS.ALWAYS WEAR THE CORRECT PERSONAL PROTECTIVE EQUIPMENT (PPE) WHENEVER YOUARE WORKING WITH, CLEANING OR MAINTAINING YOUR CASH MAGNUM XL TOOL.ALWAYS WEAR PROTECTIVE GLASSES AND HEARING PROTECTION. THE CORRECTFOOT PROTECTION MUST BE WORN. THERE IS A RISK THAT IF THE TOOL IS DROPPED,THE BOLT MAY PENETRATE THE FOOT OF THE TOOL USER.