Accusplit Healthengine AH190M28 Operating Instructions Manual

Also see for Healthengine AH190M28: Operating instructions

Contents

replacing the battery

Accusplit Healthengine AH190M28 Operating Instructions Manual Manual pdf 1 page image

ACCUSPLIT, Inc.3090 Independence Drive, Suite 148Livermore, CA 94551 USA800-935-1996 • 925-290-1900 • FAX 925-290-1930www.ACCUSPLIT.com • support@ACCUSPLIT.comEat Right! Walk More! Live Well!e ACCUSPLIT LifestyleOperating InstructionsACCUSPLITAH190M28 PEDOMETERDISPLAYSCURRENT DAYDisplaydays17329MEMORYdisplay area (flashes when in memory mode)MEMORYbutton(no clockin memorymode)MEMORYDisplayMile/h3.219:583.57The pedometer has two display modes: CURRENT DAY andMEMORY.1. CURRENT DAY display: Display area in lower right ofscreen shows SPEEDOMETER function: Mile/h andclock is present in lower left corner.2. MEMORY display: Memory display area in lower rightof screen shows which day’s results you are viewing.To enter MEMORY display, first press the yellow MODEbutton, then press the gray “M” button.Return to CURRENT DAY display by repeatedly pressingthe gray “M” button until the memory display area goesback to speed indication and the clock returns.Make sure you are in CURRENT DAY display when setting upyour pedometer and checking today’s results.SETTING UP YOUR PEDOMETERACCUSPLIT products use a common setting procedure, S1-S2-S3-S4.Press S1 for 2 seconds: Enter the SET modePress S2: Change the field to be setPress S3: Change the field valuePress S4 for 2 seconds: Exit the SET modeSetting the ClockThe clock must be set in order for the memory’s automaticrollover function to work correctly.Mile/h2.045:188722ClockSpeedSTEP count2 34 51. Repeatedly press the yellow MODE button until thepedometer displays the current step count. (Thedisplay will show a line underneath the word “STEP”on the label.)2. S1: Press and hold the yellow S1 (MODE) button for 2seconds. The HOUR display will start to blink, showingthat you’ve entered SET mode.3. S3: Press the S3 ▲ (MEMORY) button to increase theHOUR display. Press the S3 ▼ (RESET) button to de-crease the HOUR display. Hold the button down tochange hours quickly. PM hours are displayed inmilitary time (1:00 PM is 13:00, 2:00 PM is 14:00, etc.).6 7990-004BHow to Open your pedometer.See diagrams at right. ACCUSPLIThealthengine12537915:15 785MODEMEMORYRESET

/ 4

Related manuals for Accusplit Healthengine AH190M28