4. How to UseUser Guide Page 4-164.1.6.7 MISCMSIC (Minimal Instruction Set Computer) has standard RAID controller CPU time settings.The time of each event is displayed in the event logs in Event message.Controller Time – Click this button to see a calendar and to change the time and dateof the controller.Password – Enter the new controller password. The default password is 00000000 (8zeros). Type another 8 characters.Password Confirmation – Confirm the new controller password.Note:Do not lose your password. If it is lost, you will have to contactyour agent or the Accusys Support Team.SNMP Notification – Select SNMPv1 or SNMPv2 to send notifications for error conditionsand possible problems to the SNMP servers. SNMP stands for Simple NetworkManagement Protocol.SNMP Target – Enter the IP address for sending the SNMP notifications.Note:The ExaSAN RAID system supports SNMP. It can set "System on IPnetworks" and allows servers to manage the system remotely.
