3-20Altos 9100B System GuideSystem Boot DriveThis parameter allows you to specify the system search sequence.The selections are:• Drive A then C: The system checks drive A first. If there isa diskette in the drive, the system boots from drive A.Otherwise, it boots from drive C.• Drive C then A: The system checks drive C first. If there isa hard disk (drive C) installed, the system boots from drive C.Otherwise, it boots from drive A.• C: The system always boots from drive C.• A: The system always boots from drive A.Boot from IDE CD-ROMWhen set to Enabled, the system checks for a bootable CD in theIDE CD-ROM drive. If a CD is present, the system boots from theCD-ROM; otherwise, it boots from the drive specified in the SystemBoot Drive parameter. When set to Disabled, the system bootsfrom the drive specified in the System Boot Drive parameter.Note that the CD-ROM drive mentioned aboverefers to an IDE CD-ROM drive.
