19Operating InstructionsPress the power button to turn the monitor on or off. The other control buttons are located at front panel of themonitor. By changing these settings, the picture can be adjusted to your personal preferences.• The power cord should be connected.• Connect the video cable from the monitor to the video card.• Press the power button to turn on the monitor position. The power indicator will light up.Front Panel Control• /Power Button:Press this button to turn the monitor ON or OFF. And display the monitor’s state.• Power Indicator:Green – Power on mode.Orange – Off mode.• Menu / Enter:Activate OSD menu when OSD is OFF or activate/de-activate adjustment function when OSD is ON or Exit OSDmenu when in Volume Adjust OSD status.• < / Volume:Activates the volume control when the OSD is OFF or navigate through adjustment icons when OSD is ON oradjust a function when function is activated.• > / Volume:Activates the volume control when the OSD is OFF or navigate through adjustment icons when OSD is ON oradjust a function when function is activated.• Auto Adjust button / Exit:1. When OSD menu is in active status, this button will act as EXIT-KEY (EXIT OSD menu).2.When OSD menu is in off status, press this button for 2 seconds to activate the Auto Adjustment function.The Auto Adjustment function is used to set the HPos, VPos, Clock and Focus.NOTES• Do not install the monitor in a location near heat sources such as radiators or air ducts, or in a place subject todirect sunlight, or excessive dust or mechanical vibration or shock.• Save the original shipping carton and packing materials, as they will come in handy if you ever have to ship yourmonitor.• For maximum protection, repackage your monitor as it was originally packed at the factory.• To keep the monitor looking new, periodically clean it with a soft cloth. Stubborn stains may be removed with aChapter 2