23Hot-Key Menua. OutlineOSD Messageb. The Description For OSD MessageItem DescriptionAuto ConfigPlease WaitWhen Analog signal input, if User Press Hot-Key “Auto”, will showThis message, and the monitor do the auto config function.Input NotSupportedWhen the Hsync Frequency, Vsync Frequency or Resolution is out ofThe monitor support range will show this message. This message willBe flying.Cable NotConnectedAnalog-Only Model: When the video cable is not connected, will showThis message. This message will be flying.No Signal Analog-Only Model: When the video cable is connected, but there isNo active signal input, will show this message, then enter power saving.