This manual is designed to assist users in setting up and using the LCD Monitor. Information in his document hasbeen carefully checked for accuracy; however, no guarantee is given to the correctness of the contents. Theinformation in this document is subject to change without notice. This document contains proprietary informationprotected by copyright. All rights are reserved. No part of this manual may be reproduced by any mechanical,electronic or other means, in any form, without prior written permission of the manufacturer.Canadian DOC NoticeThis Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.Cet appareil numerique de la classe B repecte toutes les exigences du Reglementsur le materiel brouilleur du Canada.PrefaceImportant Safety Instructions1. To clean LCD Monitor screen;Power off LCD Monitor and unplug the AC Cord.Spray a non-solvent cleaning solution onto a rag and clean the screen gently.2. Do not place the LCD Monitor near a window. Exposing the monitor to rainwater, moisture or sunlight can severely damage it.3. Do not apply pressure to theLCDscreen.Excess pressure may cause permanentdamageto the display.4. Do not remove the cover or attempt to service this unit by yourself. Servicing of anynature should be performed by an authorized technician.5. Operate LCD Monitor in a room with a room temperature of 5°C~ 40°C (or 41°F ~ 104°F).Operating LCD Monitor outside this range could result in permanent damage.6. If any of the following occurs, immediately unplug your monitor and call an authorizedtechnician.* Monitor to PC signal cable is frayed or damaged.* Liquid spilled into LCD Monitor or the monitor has been exposed to rain.* LCD Monitor or the case is damaged.3NOTEA shielded-type signal cord is required in order to meet the FCC emission limits and also to prevent interference tothe radio and television reception. It is essential that only the supplied signal cord be used.