System Housing2-372.9 Cable ConnectionsThe power backplane is complete with connectors to accommodatethe power cables for all the system components. Each cable islabeled with a cable number, and each cable’s point (head and tail) isalso numbered, because each cable can only fit one way and is notinterchangeable. For a list of all the cables and their respectiveconnectors, please refer to the power cable list in this section.The figure below illustrates the power cables that connect to thesystem board and the SCSI backplane board.CN# - System board connectorsC# - Cable numberP# - Cable point (head and tail)Power Backplane BoardSCSI BackplaneBoardSystem BoardC1:PC1:P2C2:PC3:PC2:P2C3:P2C4:PC4:PCN9CN22CN15CN15