Acer Altos 9100 Series User Manual

Contents

Acer Altos 9100 Series User Manual Manual pdf 74 page image

AcerAltos 9100 Series User’s Guide4-2Table 4-1 Default Settings for SCSI Controller and All DevicesGlobal Settings for SCSI Controller and All Devices Default ValueHost Adapter SCSI ID 7SCSI Parity Checking EnabledHost Adapter SCSI Termination EnabledBoot Device Option 0 (zero)Host Adapter BIOS 1 EnabledSupport Removable Disks Under BIOS as Fixed Disks Boot onlyExtended BIOS Translation for DOS Drives > 1 Gbyte Enabled2Display Message During BIOS Initialization EnabledMultiple Lun Support DisabledBIOS Support for Bootable CD-ROM EnabledBIOS Support for Int13 Extensions EnabledSupport for Ultra SCSI Speed EnabledIndividual Settings for Each SCSI Device Default ValueInitiate Sync Negotiation YesMaximum Sync Transfer Rate 40 MBytes/sec.Enable Disconnection YesSend Start Unit SCSI Command1 NoInitiate Wide Negotiation Yes1 Settings are valid only if host adapter BIOS is enabled.2 Do not change this setting from the default.