Acer Altos G530 Series User Manual

Also see for Altos G530 Series: Quick start user guide User manual

Contents

Acer Altos G530 Series User Manual Manual pdf 166 page image

Appendix B: Acer Altos G530 rack installation guide156Vertical mounting hole patternThe four vertical rails of the system rack contain mounting holesarranged in a manner shown in the figure below:The system occupies 5U in the rack. Count the U positions and holenumbers from the bottom up.The distance from the center of two holes with closer spacing to thecenter of the next pair is equivalent to 1U.Note: The unit of measurement used in this guide is "U"(1U = 1.75 inches or 44.45 mm). The total sum of the heights of allcomponents in the rack measured in "U" cannot exceed theheight of the rack. For more information, refer to thedocumentation that came with the system rack.When installing components, you must start your measurement fromthe center of the two holes with closer spacing. Otherwise, the screwholes on the component may not match those on the rack.