99 Altos R520 Installation Configuration Guideintegrated SAS hardware RAID 2, you need to make a driver diskette fromthe EasyBUILD first before the installation.2. Type linux dd when the prompt boot: appears at the start.3. Please select the sda as the Driver Disk Source.4. Follow the instruction to load the integrated SAS hardware RAID 2 driverfrom the driver diskette.5. At the Package Installation Defaults, select Customize software packagesto be installed.6. At the Package Group Selection step, select Development Tools underDevelopment.7. Follow the normal procedure to finish the installation.Gigabit Ethernet Driver Installation1. You can find the Intel 82546EB driver in EasyBUILD. Please refer todirectory of the 82546EB driver in Driver Required section and copy thedriver from the EasyBUILD to HDD first.# mount /media/cdrecorder# cp –R /media/cdrecorder/Disk/R520/NIC/Intel/pro1000.lx/. /tmp2. Change the directory to the driver source and install the driver# cd /tmp/src/# make install# insmod e1000.ko3. Run the kudzu utility, it will auto detect the Intel 82563EB networkcontroller and help you to configure it.# kudzu4. Restart the network service to bring up both of the network interfaces.# service network restartRAID Utility Installation1. You can find the RAID Web Console 2 in EasyBUILD. Please copy the utilityfrom the EasyBUILD to HDD first.# mount /media/cdrecorder# cp –R /media/cdrecorder/app/R520/raid/Integrated_SAS/Linux/. /tmp2. Install RAID Web Console 2 utility# cd /tmp/# unzip ir3_Linux_RWC2_v1.13-00.zip
