27 Altos R520 Installation Configuration GuideVGA Driver Installation1. Windows will treat onboard VGA as Standard VGA device. You can findthe ATI ES1000 driver in EasyBUILD. Please insert the EasyBUILD into theoptical drive.2. Expand Drivers -> Altos R520 -> Graphics adapters -> ATI ES1000, selectWindows Server 2008 and click on Setup.3. Follow the instruction to install the VGA driver and reboot the serverafter the driver is installed.RAID Utility Installation1. Please insert the EasyBUILD into the optical drive.2. Expand Utilities -> Altos R520 -> Integrated SAS SW RAID, select RAIDWeb Console 2 (Windows) and click on Setup.3. Follow the instruction and use the default setting to complete the RAIDUtility Installation.Network Utility InstallationThe PROSet utility for the onboard Gigabit Ethernet controller will be installedautomatically when you installing the onboard Gigabit Ethernet driver.Windows Server 2008 Enterprise Edition Installation (withonboard SATA RAID)Below information describes how to manually install Windows Server 2008Enterprise Edition on Altos R520.BIOS RequiredAltos R520 BIOS P88 (or later), BMC 63 (or later) and FRUSDR 47 (or later) arerequired to support Windows Server 2008.Drivers RequiredFor Windows Server 2008 Installation, the following device drivers are required.Device Version EasyBUILD Versiononboard SATA RAID 09.32.0207.2008 EasyBUILD 8.0 build 200 (or later)Onboard Chipset 8.6.0.1002 EasyBUILD 8.0 build 200 (or later)Onboard GigabitEthernet 9.12.17.0 EasyBUILD 8.0 build 200 (or later)Onboard VGA 8.240.50.3000 EasyBUILD 8.0 build 200 (or later)Onboard USB 2.0 N/A OS built-inIOAT 1.2.79.9 EasyBUILD 8.0 build 200 (or later)
