Altos R720 Installation Configuration Guide 22EasyBUILD 7.1 build 100 into the optical drive.2. Expand Drivers -> Altos R720 -> Graphics adapters -> ATI ES1000, selectWindows Server 2003 x64 and click on Setup.3. Follow the instruction to install the VGA driver and reboot the serverafter the driver is installed.4. After installing the driver, you would see ATI ES1000 listed in Displayadapters.Microsoft Scalable Networking Pack InstallationYou can find the Microsoft Scalable Networking Pack for Windows Server 2003x64 in the Microsoft website:http://www.microsoft.com/downloads/details.aspx?FamilyID=778ee6fe-5359-4c2f-b89d-f35f2b1b83cd&DisplayLang=en1. Download the SNP from Microsoft website.2. Double-click on the downloaded file to run the installation program.3. Follow the instruction to install the SNP and reboot the server after theSNP is installed.RAID Utility Installation1. Please insert the EasyBUILD 7.1 build 100 into the optical drive.2. Expand Utilities -> Altos R720 -> Integrated SAS hardware RAID, selectRAID Web Console 2 (Windows) and click on Setup.3. Follow the instruction and use the default setting to complete the RAIDUtility Installation.Network Utility Installation1. Please insert the EasyBUILD 7.1 build 100 into the optical drive.2. Expand Utilities -> Altos R720 -> Intel 82563EB Gigabit Controller, selectPROSet Utility (Windows Server 2003 x64) and click on Setup.3. Follow the instruction and use the default setting to complete theNetwork Utility Installation.Windows Server 2003 Enterprise x64 Edition Installation (withintegrated SAS hardware RAID 2)Below information describes how to manually install Windows Server 2003Enterprise x64 Edition on Altos R720.Drivers RequiredFor Windows Server 2003 x64 Installation, the following device drivers arerequired.
