Drive Management958.2.2.4 Click “OK” to Create LDOnce the physical drives that will be used in the LD have been selected and all the desired LDparameters have been selected:1 Click the “OK” button at the bottom of the LD management window shown in Figure 8–2.2 A confirmation window shown in Figure 8–12 will appear. If you are certain that you want to createthe LD with the settings you have selected, click the “OK” button.3 If you selected the “OK” button in the “Please Confirm” window the “Create In Progress” contentwindow shown in Figure 8–13 will display logical drive creation progress.8.2.3 Expanding a Logical VolumeWhen physical drives are added to the array, the additional capacity can be added to existing logicaldrives.Figure 8–12 : Confirm LD CreationFigure 8–13 Create in Progress
