Chapter 5 165BIOS Recovery by Crisis DiskBIOS Recovery Boot Block:BIOS Recovery Boot Block is a special block of BIOS. It is used to boot up the system with minimum BIOSinitialization. Users can enable this feature to restore the BIOS firmware to a successful one once the previousBIOS flashing process failed.BIOS Recovery Hotkey:The system provides a function hotkey: Fn+Esc, for enable BIOS Recovery process when system is poweredon during BIOS POST. To use this function, it is strongly recommended to have the AC adapter and Batterypresent. If this function is enabled, the system will force the BIOS to enter a special BIOS block, called BootBlock.Steps for BIOS Recovery by Crisis Disk:Before doing this, a Crisis Diskette should be prepared ready in hand. The Crisis Diskette could be made byexecuting the Crisis Disk program in another system with Windows 7 OS.Follow the steps below:1. Plug in the USB disk.2. Launch the wincris.exe program to create a USB Crisis Disk. Click Start to initiate the process.3. Select the Quick Format option to format the disk and click Start. Follow the instructions on the screen tocreate the disk.4. Copy the KAYF0X64.fd BIOS file into USB flash disk root directory.NOTE: Do not place any other *.fd file in the USB flash disk root directory.To use the Crisis USB key, do the following:1. Plug USB storage into USB port.2. Press Fn + ESC button then plug in AC power.The Power button flashes orange once.3. Press Power button to initiate system CRISIS mode.When CRISIS is complete, the system auto restarts with a workable BIOS.4. Update the latest version BIOS for this machine by regular BIOS flashing process.
