4-16 TroubleshootingUndetermined Problems 0The diagnostic problems does not identify which adapter or device failed, which installeddevices are incorrect, whether a short circuit is suspected, or whether the system isinoperative.Perform the following procedures to isolate the failing FRU (do not isolate non-defective FRU):NOTE:NOTE:Verify that all attached devices are supported by the computer.NOTE:NOTE:Verify that the power supply being used at the time of the failure is operating correctly.(Refer to Power On Issues).1. Remove power from the computer.2. Visually check them for damage. If any problems are found, replace the FRU.3. Remove or disconnect all of the following devices:Non-Acer devicesPrinter, mouse, and other external devicesBattery packHard disk driveDIMMCD-ROM/Diskette drive ModulePC Cards4. Apply power to the computer.5. Determine if the problem has changed.6. If the problem does not recur, connect the removed devices one at a time until failing FRUis found.7. If the problem remains, replace the following FRUs one at a time. Do not replace anon-defective FRU:System boardLCD assembly
