Acer CP-8660 User Manual

Acer CP-8660 User Manual Manual pdf 14 page image

EN-14Charging the BatteryUsing the optional AC power adapter may charge the battery or operate the cameraas power supply. Make sure that the power of the camera is off and then insert thebattery before starting.1. Insert one end of the AC power adapter intothe DC IN 5V terminal of the camera.2. Insert the other end of the AC power adapterinto a wall outlet.J The status LED flashes green whencharging is started and lights green whencharging is completed. The LED lights redwhen a charging error has occurred.J It is recommended to fully discharge thebattery before recharging.J Charging time varies according to theambient temperature and the status ofbattery.J This camera must be used with specified AC power adapter. Damage causedby the use of an incorrect adapter is not covered under the warranty.J Always make sure that the camera is off before removing the battery.J The battery may feel warm after it has been charged or immediately afterbeing used. This is normal and not a malfunction.J When using the camera in cold conditions, keep the camera and batterywarm by storing it in a warm place such as an interior pocket between shots.J If you open the battery cover without removing the battery, the batterypower will not be disconnected.J If you remove the battery, you have to insert the battery within 2 hours inorder to make sure that the date and time will not be reset.