Acer LCD monitor Quick Start Manual

Contents

Acer LCD monitor Quick Start Manual Manual pdf 5 page image

5Connecting the DevicesCaution: Make sure that the computer and the monitor are both disconnected from thepower supply.○1 Power Code Attach the monitor to the power cord which should then be insertedinto a properly grounded electric socket.○2 VGA Cable Connect the signal cable to the VGA input socket of the monitor , andconnect the signal cable to the VGA output socket of the graphics cardon the computer. Then tighten the thumbscrews on the connector.○3 DVI-D Cable(Optional)Connect the signal cable to the DVI-D input socket of the monitor , andconnect the signal cable to the DVI-D output socket of the graphicscard on the computer. Then tighten the thumbscrews on the connector.！WARNING:1. Make sure the VGA card of your computer to connect the correct cable.2. Make sure the shape of the plug matches the shape of the socket it is inserted into.And that none of the pins are bent or otherwise damaged.VGA DVI-D