Acer PD320 User Manual
Also see for PD320: User guideManual
                           | |
Contents
| 
10English Powering Off the Projector1. Press the Power/Standby button to turn off the projector lamp.2. After pressing the Power/Standby button, you will see a message Power off thelamp? on the on-screen display. Press the Power/Standby button again toconfirm. Otherwise the message will disappear after 5 seconds.3. Power/Standby LED indicator will flash amber for about 30 seconds.4. Disconnect the power cord from the electrical outlet and the projector.* When the LAMP indicator lights solid orange; please change the lampmodule immediately.* When the TEMP indicator lights solid orange, it indicates the projectorhas been overheated. The display will automatically shut itself down.Under normal conditions, the display can be switched on again for yourpresentation. If the problem persists, you should contact your local dealer orour service center.* No matter the video source is input or not, if you pressPower/Standby byaccident, a Power off the lamp ? sign will display in screen. You can clearthe turn-off message by pressing any function key. Or you can just ignore thismessage without pressing any function key; the message will disappear after5 seconds and restore to previous status.Downloaded from ProjectorsManual.com Manuals |
Related manuals for Acer PD320
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine