Acer PD320 User Manual
Also see for PD320: User guideManual
                           | |
Contents
| 
25EnglishChanging the lampThe projector will detect the lamp life itself. It will show you a warningmessage Lamp is running out of standard lifetime. Be sure to replace thelamp as soon as possible. When you see this message, change the lampas soon as possible.Make sure the projector has been cooled down for at least 30 minutesbefore changing the lamp.Warning: Lamp compartment is hot! Allow it to cool down beforechanging lamps!R Lamp Changing Procedure:1. Turn off the power to the projectorby pressing the Power/Standbybutton.2. Allow the projector to cool down atleast 30 minutes.3. Disconnect the power cord.4. Use screwdriver to remove thescrew from the cover.5. Remove the cover.6. Remove the 5 screws from thelamp module.7. Pull out the lamp module.To replace the lamp module,reverse the previous steps.Warning: To reduce the risk of personal injury, do not drop the lamp module or touchthe lamp bulb. The bulb may shatter and cause injury if it is dropped.Downloaded from ProjectorsManual.com Manuals |
Related manuals for Acer PD320
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine