Chapter 2 35Multi-Boot MenuUsers can press F12 during POST to enter the Multi Boot Selection Menu. In this menu users can change bootdevice without entering BIOS SETUP utility.NOTE: If users disable the multi boot selection menu in BIOS SETUP utility, the message “ Press F12 to enterthe multi boot selection menu” will not appear during POST.NOTE: If users disable the “Boot on LAN” option in BIOS SETUP utility, then the option of Realtek PXE2.0Boot Agent will not appear.Navigating the BIOS UtilityThere are six menu options: System Information, Basic System Settings, Startup Configuration, OnboardDevice Configuration, System Security and Loading Default Settings.To enter a menu, highlight the item using the w / y keys, then press e.Within a menu, navigate through the BIOS Utility by following these instructions:T Press the w / y keys to move between the parameters.T Press the p / qkeys to change the value of a parameter.T Press the | key while you are in any of the menu options to return to the main menu.NOTE: You can change the value of a parameter if it is enclosed in square brackets. Navigation keys areshown at the bottom of the screen.Boot Menu1. +Removable Devices2. +Hard Drive3. CD-ROM driveBoot MenuBoot Menu1. +Removable Devices2. +Hard Drive3. CD-ROM drive1. +Removable Devices2. +Hard Drive3. CD-ROM drive
