2-5 System UtilitiesMainThe Main tab allows the user to set the system time and date, enable or disable boot option, andenable or disable recovery.Figure 2:2. BIOS MainParameter DescriptionSystem Time Sets the system time in 24-hour format.System Date Sets the system date.Total Memory Displays the total memory installed.Video Memory Displays the video memory installed.Quiet BootWhen enabled, displays the OEM (original equipmentmanufacturer) screen during system boot instead of the traditionalPOST screen.Network Boot Enable or disable system boot from LAN (local area network).F12 Boot Menu Enable or disable the use of boot menu during POST.D2D Recovery Enable or disable disc-to-disc recovery by pressing Alt+F10 keyduring POST.Wake on LAN Enable or disable system to wake up from LAN.SATA Mode Select the SATA controller mode: AHCI or IDE.Wi-Fi Enable or disable the Wi-Fi.Bluetooth Enable or disable the Bluetooth.Card Reader Enable or disable the Card Reader.F9 Setup DefaultsF10 Save and ExitF1EscHelpExitSelect ItemSelect Menu EnterF5/F6Select Sub-MenuChange ValuesInsydeH20 Setup Utility Rev. 3.7MainSystem Time : [19:03:49]System Date : [01/01/2012]Total Memory: 2048 MBVideo Memory: 128MBQuiet Boot [Enable]Network Boot [Enable]F12 Boot Menu [Disable]D2D Recovery [Enable]Wake on LAN [Disable]SATA Mode [AHCI Mode]Wi-Fi [Enable]Bluetooth [Enable]Card Reader [Enable]USB ports [Enable]Wired Lan [Enable]Audio [Enable]Camera [Enable]Power-off USB Charge [Disable]Battery Threshold [20%]Information Security ExitBootThis is the help of the[Hour:Minute:Second] field. Hour validrange is from 0 to 23, Minute is from 0to 59, Second is from 0 to 59. INCREASE/REDUCE : F6/F5.Item Specific Help
