User Manual of Network Zoom camera 431. Connect the network camera to your PC directly with a network cable.2. Enter the 802.1X Settings interface:Configuration > Advanced Configuration > Network > 802.1XFigure 6-16 802.1X Settings3. Check the Enable IEEE 802.1X checkbox to enable it.4. Configure the 802.1X settings, including user name and password.Note: The EAP-MD5 version must be identical with that of the router or theswitch.5. Enter the user name and password (issued by the CA) to access the server.6. Click to finish the settings.Notes: The camera reboots when you save the settings.7. After the configuration, connect the camera to the protected network.6.3.7 Configuring QoS SettingsPurpose:QoS (Quality of Service) can help solve the network delay and network congestion byconfiguring the priority of data sending.Steps:1. Enter the QoS Settings interface:Configuration >Advanced Configuration > Network > QoSFigure 6-17 QoS Settings2. Configure the QoS settings, including video / audio DSCP, event / alarm DSCPand Management DSCP.
