User Manual of Network Zoom camera 74(3) Check the checkbox and click to copy settings of thisday to the whole week. You can also check any of the checkboxes beforethe date and click .(4) Click to save the settings and exit the Edit Record Scheduleinterface.6. Click to save the settings.7.3 Configuring Snapshot SettingsPurpose:You can configure the scheduled snapshot and event-triggered snapshot. You canupload the captured pictures to a FTP server.Basic SettingsSteps:1. Enter the Snapshot Settings interface:Configuration > Advanced Configuration > Events > Snapshot2. Check the Enable Timing Snapshot checkbox to enable continuous snapshot.Check the Enable Event-triggered Snapshot checkbox to check event-triggeredsnapshot.3. Select the quality of the snapshot.4. Set the time interval between two snapshots.5. Click to save the settings.Uploading to FTPNote: Please make sure that the FTP server is online.You can follow below configuration instructions to upload the snapshots to FTP. Upload continuous snapshots to FTPSteps:1) Configure the FTP settings and check checkbox in FTPSettings interface. Please refer to Section 6.3.8 Configuring FTP Settings formore details to configure FTP parameters.2) Check the Enable Timing Snapshot checkbox. Upload event-triggered snapshots to FTPSteps:1) Configure the FTP settings and check checkbox in FTPSettings interface. Please refer to Section 6.3.8 Configuring FTP Settings for more