Appendix D: Power ConsumptionAppendix D: Power ConsumptionPower Consumption ManagementPurposeThe purpose of the power consumption test is to verify the power dissipationof the system and the load of the power supply.Test Equipment1. PROVA CM-07 AC/DC CLAMP METER2. Burn-in test ver:2.0Device Under TestDUT: sys#1/Test Procedure1. Power up DUT and then boot Windows 7.2. Enter the standby mode (HDD power down).3. Measure the power consumption and record it.4. Run the Burn-in test program to apply 100% full loading.5. Measure the power consumption and record it.AcuPanel 15Full-Loading ModeTotalStandby ModeTotal+12V3.2A38.4W0.75A9W+24V1.65A39.6W0.41A9.84W+30V1.26A37.8W0.36A10.8W83
