Adaptec 39160 Manual

Also see for 39160: Installation guide Manual

8Adaptec SCSI Card 39160 User’s ReferenceIf Windows 95/98 does not detect the Adaptec SCSI Card 39160, getthe driver disk or CD included with the SCSI card and run the AddNew Hardware wizard again:1 Double-click the Add New Hardware icon in Control Panel.2 Click Next to begin installing your new hardware.3 Select No and click Next to select the type of hardware youwant to install.4 Select SCSI controllers and click Next.Note: The 39160 will not appear on the Models listwhen Adaptec is selected from the Manufacturers list.5 Click Have Disk... and follow the directions that appear on thescreen to install the driver software.6 Select 29160(N), 39160, AHA-3960D, AIC-7892/7899 Ultra160PCI SCSI Controller.How can I check the status of a resource such as IRQ, Memory, or I/O?1 Right click on My Computer.2 Select Properties from the menu.3 Click the Device Manager tab.4 Double-click the Computer icon.5 On the View Resources tab, click the option button for the typeof resource you want to check:n Interrupt Request (IRQ)n Input/Output Address (I/O)n Direct Memory Access (DMA)n Memory6 The setting and the hardware using the setting are displayed.n If a specific resource is not listed, the resource is not usedby a device.