Adaptec AAA-130U2 Installation And Hardware Manual

Contents

A-3Using SCSISelect and Disk UtilitiesStarting the SCSISelect UtilityTo start SCSISelect, press the F6 key when the following promptappears when you turn on or reboot your system:Press for SCSISelect (TM) Utility!The menu that appears displays the options Configure/View HostAdapter Settings and SCSI Disk Utilities, as shown in Figure A-1.Using SCSISelect MenusTo select a SCSISelect menu option, move the cursor to the optionwith the ↑ and ↓ keys, then press Enter. In some cases, selecting anoption displays another menu. You can return to the previous menuat any time by pressing Esc.To restore the original SCSISelect default values, press F6 from theConfigure/View Host Adapter Settings screen. To toggle the displaybetween color and monochrome modes, press F5 from the mainSCSISelect screen (this feature does not work on some monitors).Exiting SCSISelectTo exit SCSISelect, press Esc until a message prompts you to exit (ifyou changed any host adapter settings, you are prompted to savethe changes before you exit). Select Yes to exit, then press any key toreboot the system. Any changes you made in SCSISelect take effectafter the system boots.Adaptec Array1000 Family SCSISelect(TM) UtilityArrow keys to move cursor, to select option, to exit (*=default)Would you like to configure the PCI device, or run theSCSI disk utilities? Select the option and press .Press to switch between color and monochrome modes.Adaptec Array1000 Family at Bus:Channel 00:AOptionsConfigure/View Host Adapter SettingsSCSI Disk UtilitiesFigure A-1. SCSISelect Menu