Chapter 2: Using the Command Line Utility ● 15arcconf getconfigLists information about the controllers, logical drives, and physical devices. This informationcan include (but is not limited to) the following items:● Controller type● BIOS, boot block, device driver, and firmware versions● Logical drive status, RAID level, and size● Physical device type, device ID, presence of PFA● Physical device state● Enclosure information: fan, power supply, and temperature statusSyntaxARCCONF GETCONFIG [AD/LD[LD#]/PD/AL]ParametersController# is the controller numberAD/LD/PD/AL options:● AD—Adapter information only● LD#—Optionally displays information about the specified logical device.● PD—Physical device information only● AL—All information (optional)ExampleARCCONF GETCONFIG 1 ADarcconf getlogsObtains controller log information.Provides access to the status and event logs of a controller. You can retrieve three types of logs:● DEVICE—A log of any device errors the controller has encountered● DEAD—A log that records any occurrences of defunct devices● EVENT—A log of special events that may have occurred (e.g., rebuilds, LDMs, etc.)SyntaxARCCONF GETLOGS [clear/tabular]ParametersController# is the controller numberType is one of the following types of log to retrieve:● DEVICE● DEAD● EVENT● CLEAR—Optional, clears the specified controller log