Chapter 8: Installing the Driver on an Existing Operating System ● 58Installing on UnixWareTo install the driver on UnixWare:1 Start your computer, then insert the driver disk.2 Begin the driver package installer:pkgadd -d diskette13 At the installer prompt, type go.4 Select 1 for the aacraid package.5 When the installation is complete, select q to quit the installer.6 Reboot your computer and remove the driver disk.7 Continue with Managing Your Storage Space on page 60.Installing on VMwareNote: The embedded driver provided by VMware should be suitable for most applications. If anupdated driver is needed, use the following procedure.To install the driver on VMware:1 Start your computer, then insert the driver disk.2 At the console screen of the VMware server, mount the Adaptec CD:mount –r /dev/cdrom /mnt/cdrom.3 Install the module RPM:rpm –ivh /mnt/cdrom/xxx/yyy.rpmwhere xxx is the driver path, and yyy.rpm is the rpm file.4 Reboot your computer and remove the driver disk.Note: Currently, ICP Storage Manager is not supported on VMware. To create and managearrays, use the ICP RAID Configuration utility. See page 62 for more information.
