Adaptec RAID 1220SA Installation And User Manual

Also see for 1220SA - RAID Controller: Installation and user guide User guide Installation guide User guide User guide

Contents

Adaptec RAID 1220SA Installation And User Manual Manual pdf 23 page image

Chapter 2: About Your HostRAID Controller l 23About the Adaptec 1225SA ControllerThe Adaptec 1225SA is a low-profile PCIe to 2 external port SATA II HostRAID controller withthese features:Note: Adaptec 1225SA controller does not support bootable devices.Note: There is no separate I2C connector. See the HostRAID Controller LED and I2C ConnectorReference on page 87 for details.Form factor Low-profileBus compatibility PCIe-X1Ports 2 external SATA portsYou can also connect one SATA driveenclosure with a port multiplier. For detailsabout supported port multipliers, refer toHostRAID Controller Features on page 15.Connector, internal 0Connector, external 2 external SATA connectorsRAID levels 0, 1 and 10Simple Volume YesDisk drives SATA II (3.0Gbps) NCQ-enabled drives oreSATA drives.Maximum number of disk drives 2Hot spares YesEnclosure support Yes—for port multiplier enclosures.Native Command Queuing (NCQ) YesAudible alarm NoMounting bracket PCIe X1 connectorExternal SATA connectorsJ1 LED Connector