Chapter 2: Using the Command Line Utility ● 18arcconf rescanEnables the controller to check for the removal of any disk drives in the ready state and to checkfor the connection of any new disk drives to the controller. The command returns when therescan is complete.SyntaxARCCONF RESCAN ParametersController# is the controller numberExampleARCCONF RESCAN 1arcconf romupdateAllows new firmware and BIOS to be flashed to the controller. A reboot is required for the newfirmware to take effect.Note:1 This function is only supported in Windows and Linux.2 Be sure to copy the *.UFI update files from the CD and not from the BIOS/Firmwareupdate diskettes.SyntaxARCCONF ROMUPDATE ParametersController# is the controller numberBaseName is the name of the ROM image basename or the fully qualified name if you have aset of controller ROM images.Note: All UFI files must be in the same directory prior to invoking ARCCONF. If you are copyingUFI files from floppy images, be sure to check all images.ExampleARCCONF ROMUPDATE 1 AC2200ARCCONF ROMUPDATE 1 AC220001.UFI