Chapter 1: Getting Started with the Command Line Utility ● 84 Follow the instructions on the screen to complete the installation.5 Unmount the CD drive:umount /mntInstalling on SolarisNote: HRCONF is not supported by systems running Solaris.To install ARCCONF on Solaris systems:1 Insert the Adaptec Storage Manager Installation CD.The CD mounts automatically. (If it doesn’t, manually mount the CD using a commandsimilar to the one shown below. Refer to your operating system documentation for detailedinstructions.)mount -F hsfs -o ro/dev/dsk/c1t0d0s2/mnt2 Install Adaptec Storage Manager:pkgadd -d//solaris/manager/StorMan.ds3 Follow the on-screen instructions to complete the installation.Eject or unmount the Adaptec Storage Manager Installation CD. Refer to your operatingsystem documentation for detailed instructions.Installing on FreeBSDTo install ARCCONF on FreeBSD systems:1 Insert the Adaptec Storage Manager Installation CD.2 Mount the Adaptec Storage Manager installation CD:mount /cdrom /mntNote: Your CD-ROM drive may have a different device name or path.3 Copy the ARCCONF file to the local hard drive:cp -p /cdrom/freebsd(version)/cmdline/arcconf/(root or other directory)4 Change to the ARCCONF installation directory, then enter this command:chmod +x arcconf5 Unmount the Adaptec Storage Manager Installation CD. Refer to your operating systemdocumentation for detailed instructions.Installing on VMWareTo install ARCCONF on VMWare systems:1 Insert the Adaptec Storage Manager Installation CD.2 Mount the Adaptec Storage Manager installation CD:mount -r /dev/cdrom /mnt/cdrom