Adaptec SCSI RAID 2010S Installation Manual

Also see for 2010S - SCSI RAID Storage Controller: Software user's guide

Contents

Adaptec SCSI RAID 2010S Installation Manual Manual pdf 15 page image

1-8Adaptec SCSI RAID 2010S/2015S Installation GuideStorage Management Software OverviewAdaptec supplies a number of software applications for setting upand managing RAID arrays with the Adaptec ZCR. One is aGraphical User Interface (GUI), one is a Command-Line Interface(CLI) that is loaded along with the GUI application, and the third isprovided as a utility that may be used before the operating systemis available.■ Adaptec Storage Management software—The GUI throughwhich you interact with the storage subsystem. StorageManager supports the following operating systems:Note: Up-to-date information, including the latest versionsof drivers and RAID management software for AdaptecRAID products, may be found by perusing Adaptec’s website at www.adaptec.com. Similar information for LINUXmay be found at linux.adaptec.comFurthermore, Adaptec Storage Management providesadditional features, such as Simple Network Mail Protocol(SNMP) and Desktop Management Interface (DMI) agents.■ RAIDUTIL CLI—Provides the same functions as StorageManager in environments where a GUI is not available. It is alsoscriptable, making it an invaluable companion RAIDconfiguration utility in environments where many similarly-configured RAID subsystems must be replicated quickly. Fordetails, refer to the Adaptec Storage Management Software User’sGuide.■ SMOR—A built-in utility that is part of the controller’s BIOScode. Start SMOR by pressing Ctrl+A during BIOS startup. Fordetails, refer to Configuring the Controller to Boot from Channel 1on page -8.■ Windows NT 4.0, 2000, XP■ Red Hat Linux 7.3