Adaptec xw4100 Software User's Manual

Also see for 2120S - SCSI RAID Controller: User guide Installation guide Installation guide Installation and user guide Installation guide

Contents

Adaptec xw4100 Software User's Manual Manual pdf 29 page image

2-13Using Adaptec RAID ConfigurationThe Ctrl-B option in ACU moves any array to be array 00.Using this option repeatedly allows any boot order to bechosen.The default is Disabled.■ Physical Drives Display during POST— The default isDisabled.■ CD-ROM Boot Support — The default is Enabled.■ Removable Media Devices Support — The default isEnabled.■ Alarm Control — The default is Enabled.You cannot set the following options:■ NVRAM State — Displays the current status of the NVRAMcache. This option is available only for controllers that havea battery and is for display only. In normal operation it willdisplay Clean.■ Controller Memory Size — Displays the amount of memoryinstalled on the controller.Using the SCSI Configuration UtilityThe SCSI Configuration Utility enables you to modify the SCSIChannel Interface Definitions and SCSI Device ConfigurationOptions.To access the SCSI Configuration Utility:1 When you turn on or reboot your system, press Ctrl+A to accessthe Adaptec RAID Configuration (ARC) utilities whenprompted by the following message:Press for Adaptec RAID Configuration Utility2 If multiple controllers are installed, select the controller youwant to configure and press Enter.3 From the ARC menu, select SCSISelect Utility.The Controller Configuration and SCSI Configuration menuoptions are displayed.4 Select SCSI Configuration.