Adcom GTP-870HD User Manual

Also see for GTP-870HD: Quick start guide Brochure

Contents

Adcom GTP-870HD User Manual Manual pdf 51 page image

51Chapter 3 - Setupwww.adcom.com GTP-870HD Owner’s ManualDeleting Remote CommandsDeleting a Command1 On the GTP-870HD remote, press the applicableSource and Select buttons simultaneously.• The orange status LED and the Source buttonglow and remain lit.2 Press the button whose function you wish toclear.• The orange status LED begins flashing.3 Press the Backlight button.• The green status LED blinks twice and thengoes back to steady orange to indicate thatthe command has been deleted.• Repeat steps 2~3 for any other commandsyou wish to delete for that Source compo-nent.4 Press the Source and Select buttons simultane-ously to save and exit.• The orange status LED blinks twice and turnsoff.Deleting all Commands for a Component1 On the GTP-870HD remote, press the Source andSelect buttons simultaneously.• The orange status LED and the Source buttonglow and remain lit.2 Press and hold the Backlight button.• The red status LED blinks five times.• The green status LED then blinks twice andgoes back to steady orange to indicate thatall commands for the selected Source com-ponent have been deleted.3 Press the Source and Select buttons simultane-ously to save and exit.• The status LED blinks twice and turns off.Deleting all Commands for all ComponentsThis procedure erases every programmed commandaccessed under the selected Video 1, Video 2, Video3, Video 4, CD, Tuner, and Room 2 input selectors.Make sure you really want to do this before followingthe step below.1 Press and hold the Video 2 button and the Back-light button simultaneously.• The red status LED blinks twelve times.• The status LED will then flash green once,followed by a single orange pulse.2 All LEDs will then turn off, indicating that everylearned command in the GTP-870HD remote hasbeen erased.Backlight button