AIMB-585 User Manual 21.1 IntroductionAIMB-585 is designed with the Intel Q70/C236/H110 for industrial applications thatrequire both performance computing and enhanced power management capabilities.The motherboard supports Xeon E3-1275 v5 3.6GHz/ E3-1225 v5 3.3GHz/E3-1268Lv5 2.4GHz/ Core i7-6700 3.4GHz/ Core i5-6500 3.2GHz/ Core i3-6100 3.7 GHz/ Pen-tium G4400 3.3 GHz/ Celeron G3900 2.8 GHz processor up to 8 MB L3 cache andDDR4 2133 MHz up to 64GB, per slot up to 16 GB. A rich I/O connectivity of 6 serialports, 2 USB 2.0, 12 USB 3.0, dual GbE LAN, 4 SATA III ports.1.2 Features Rich I/O connectivity: Dual GbE LAN via PCIe x1 bus, 1 x PCIe x16 slot (Gen3), 1 x PCIe x8 slot (Gen 3), 1 x PCIe x4 slot (Gen 3), 1 x PCIe x1 slot (Gen 3),2 USB 2.0 ports and 12 USB 3.0 ports. Standard Micro ATX form factor with industrial features: The AIMB-585 is afull featured Micro ATX motherboard with balanced expandability and perfor-mance. Wide selection of storage devices: SATAIII HDD, customers benefit from theflexibility of using the most suitable storage device for larger capacity. Optimized integrated graphic solution: With Intel® Flexible Display Interface,it supports versatile display options and 32-bit 3D graphics engine.1.3 Specifications1.3.1 System CPU: Intel 6th generation Xeon E3 and Core i7/i5/i3 processor BIOS: AMI EFI 128 Mbit SPI BIOS System chipset: Intel® C236/Q170/H110 SATA hard disk drive interface: Four on-board SATA connectors with datatransmission rate up to 600 MB1.3.2 Memory RAM: Up to 64 GB in 4 slots 288-pin DIMM sockets. Supports dual-channelDDR4 2133MHz SDRAM.– AIMB-585QG2 & AIMB-585L supports non-ECC unbuffered DIMMs and donot support any memory configuration that mixes non-ECC with ECC unbuf-fered DIMMs.– AIMB-585WG2 supports ECC buffered DIMMs.Note! A 32-bit OS may not fully detect 4GB of RAM when 4 GB is installed.
