AIMB-585 User Manual 142.1 IntroductionYou can access most of the connectors from the top of the board as it is beinginstalled in the chassis. If you have a number of cards installed or have a packedchassis, you may need to partially remove the card to make all the connections.2.2 USB Ports (LAN1_USB12/LAN2_USB34/USB561112/USB78/USB910/USB1516)The AIMB-585 provides up to 14 USB ports. The USB interface complies with USBSpecification Rev 2.0 supporting transmission rates up to 480 Mbps and Rev 3.0 sup-porting transmission rate up to 5 Gbps and is fuse protected. The USB interface canbe disabled in the system BIOS setup.The AIMB-585 is equipped with two high-performance 1000 Mbps Ethernet LANadapters, both of which are supported by all major network operating systems. TheRJ-45 jacks on the rear panel provides convenient LAN connection.Table 2.1: LAN LED IndicatorLAN Mode LAN IndicatorLAN1 indicatorLED1 (Right) off for mal-link; Link (On) / Active (Flash)LED2 (Left) 100 Mbps (On) / 10 Mbps (Off); Color: OrangeLED2 (Left) 1000 Mbps (On); Color: GreenLAN2 indicatorLED1 (Right) off for mal-link; Link (On) / Active (Flash)LED2 (Left) 100 Mbps (On) / 10 Mbps (Off); Color: OrangeLED2 (Left) 1000 Mbps (On); Color: GreenUSB561112LAN1_USB12 LAN2_USB34
