Mechanical installationDLT-V72 Operating Instructions V2.50 83 / 12112. Mechanical installation12.1. Safety notesWARNINGRisk of injury and damage due to improper mechanical installation.These mounting instruction are directed to skilled personnel. Only qualified skilled personnel may performthe mechanical installation work on the DLT-V72. If the DLT-V72 is incorrectly mounted, any warranty forthis device will be void.The mounting of the DLT-V72 must not endanger the safety of the operating personnel.Example: When mounting to forklifts, the driver's field of view must remain free.Hazardous voltage, electric shock from contact with live parts. Do not put the DLT-V72 into operation if it is visibly damaged. Do not open or modify the DLT-V72.Risk of injury due to weight and sharp-edged parts.The DLT-V72 can fall down and cause injuries due to its weight.The strain relief rail can have sharp edges and cause cutting injuries. Always hold the DLT-V72 by the housing with both hands. Never use the antenna as a handle. It can break due to the weight involved. Do not hold the DLT-V72 by the strain relief rail. Use the assistance of a second person for installation work.NOTICE: Property damageDamage and scratching of the touchscreen without transport protective film.The front display of the DLT-V72 is protected during transport by a transparent film. This film should remainon the front display during assembly to avoid damage to the front display surface. Only remove the film after all of the installation work has been completed.
