Advantech FPM-3190G Series User Manual

FPM-3190G User Manual 22Multiple monitors, serial and USB controllers1. Run the self-extracting zip file to unzip the files, using the RunEloSetup option2. EloSetup will launch. Check both the "Install Serial TouchscreenDrivers" and "Install USB Touchscreen Drivers" boxes.3. Review and accept the License Agreement4. The program will appear to proceed as a single/multiple serial con-troller installation but USB files will also install.5. The driver files will install. When the "Setup Complete" screenappears, you may choose to run calibration (the Elo Video Align-ment program, EloVA) immediately or wait until later. If youchoose not to run this program now, you can run it from the EloControl Panel application. When EloVA runs for the first time, itwill attempt to calibrate all controllers and/or serial ports that wereinstalled. Press the Esc key on the keyboard to terminate or skipcalibration for any monitor, or allow the program to time out (asindicated by the progress bar reaching maximum). The programwill continue until all controllers and/or ports have been calibrated.Silent InstallThe EloSetup program for this driver may also be run as an attended orunattended program from a command line, batch file, etc. Example usage:To Silent install for USB controllers useEloSetup /iu /sTo Silent install for a Serial controller on COM1 useEloSetup /is /P:1 /sTo view all the options available for this installation method, runEloSetup as EloSetup /h.