Chapter 3 Software Configuration 333.3 VGA display software configurationThe PCM-5820 Series on-board VGA/LCD interface supports an18-bit TFT LCD, flat panel displays and traditional analog CRTmonitors. The interface can drive CRT displays with resolutions up to1024 x 768 in 16 bpp. It is also capable of driving color panel displayswith resolutions of 1024 x 768 in 18 bpp. The LCD type is configuredcompletely via the software utility, so you do not have to set anyjumpers. Configure the LCD type as follows:1. Apply power to the PCM-5820 Series with a color TFT displayattached. This is the default setting for the PCM-5820 Series.Make sure that the AWDFLASH.EXE and *.BIN files are locatedin the working drive.Note: Make sure that you do not run AWDFLASH.EXEwhile your system is operating in EMM386 mode.2. At the prompt, type AWDFLASH.EXE and press . TheVGA configuration program will then display the following:Figure 3-2: BIOS VGA setup screen
